T2.5 Stone Finish Tinplate Coil Industrial grade

This T2.5 Stone Finish Tinplate Coil Industrial grade is based on SPCC, and the surface is treated by roughening roller to form a uniform and fine stone texture, which can not only effectively cover up the slight scratches produced in the subsequent stamping and transportation, but also enhance the adhesion of printing ink and coating on it. The hardness is T2.5, which shows good ductility in formability, and is suitable for making industrial parts that need a certain degree of drawing, such as badge blanks, electric junction box covers and small motor housings. In terms of width, we can accurately slitting the mother tinplate roll according to the actual feeding width of the customer's mold. The minimum slitting width can meet the requirements of narrow-band stamping, and the end face after slitting is neat and the burr is controlled within an acceptable range. In addition to the conventional tin plating amount of 2.8/2.8, 5.6/5.6 and 1.1/1.1, the thickness of tin layer on both sides…